Vennligst vent...
Din handlevogn inneholder
Antall
Pris
Totalt
Slett
TOTALT
Eks. Mva.
0
0
Gå til kassen
Fortsett å handle

Hurtigkasse

Fullfør bestilling din uten å logge inn
Bedriftskunde? Klikk her

Leveringsmetode

Betalingsalternativer

VISA / MasterCard
Faktura
14 dagers kreditt. Få varen hjem før du betaler. Du kan også dele opp betalingen.
Priseksempel: kr.10.000, o/12 mnd., eff. Rente 35,39 %, totalt kr 11.722.

Hurtigkassen

Vi velger det rimeligste fraktalternativet og du kan betale med kort eller faktura. Ønsker du å flere alternativer for frakt og betaling, klikk på Gå til kassen. Du vil her også kunne velge 'Forskudd' for å slippe å betale adm./ekspedisjonsbegyr.

Fullfør bestilling
Ikke registrert? Registrer deg | Glemt passordet?

Varekatalog

PC, nettbrett & server

Datautstyr

Telefoni & GPS

Lagersalg

Foto & video

Hvitevarer

TV, Lyd og bilde

Spill, Film & Konsoll

Hjem & fritid

Produktguider

APC Back-UPS Pro 900VA 230V
APC Back-UPS Pro 900VA 230V
APC Back-UPS Pro 900VA 230V
APC Back-UPS Pro 900VA 230V
APC Back-UPS Pro 900VA 230V
Varenr.: BR900GI

APC Back-UPS Pro 900VA 230V

BR900GI

Kr 3 099,-
2 479,- eks. mva.
Lagerstatus nettbutikk
1 stk på lager hos leverandør (Sendes fra oss 3-5 dager etter bestilling)
Antall
 
 
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Power-saving outlets
Automatically cuts power to idle equipment to conserve electricity.

Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.

Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment

Cold-start capable
Provides temporary battery power when the utility power is out.

Serial Connectivity
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Dataline Surge Protection
Provides protection of connected equipment from power surges on the data lines.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Audible alarms
Provides notification of changing utility power and UPS conditions.

User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

USB connectivity
Provides management of the UPS via a USB port (not available on all models).

Serial Connectivity
Provides management of the UPS via a serial port.

Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.

Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Building Wiring Fault Indicator
This LED informs users of potentially dangerous wiring problems in the wall circuit.

Adjustable voltage sensitivity
Provides the ability to adapt the Power Conditioner for optimal performance in specific power environments or generator applications.

Battery replacement without tools
Allows quick, easy battery replacement.

LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.

APC BR900GI. Output power capacity (VA): 900 VA, Output power: 540 W, Power supply input frequency: 50/60 Hz. Battery technology: Sealed Lead Acid (VRLA), Battery recharge time: 8 h. Colour of product: Black. Weight: 10.72 kg. Operating temperature range (T-T): 0 - 40 °C, Storage temperature range (T-T): -15 - 45 °C, Operating relative humidity range: 0 - 95 %

Tekniske spesifikasjoner

Kilde
Sammendrag
Karakter
Andre kunder kjøpte også
HP eCP 3y OSS NBD only Desktop w 1y War
750,-
Legg varen i handlekurven
HP eCP 3y OSS NBD only Desktop w 1y War
Trendnet 12-PORT CAT.6 UNSHIELDED
599,-
Legg varen i handlekurven
Trendnet 12-PORT CAT.6 UNSHIELDED
HP HDD 146GB 10K SAS 2,5Inch
1 550,-
Legg varen i handlekurven
HP HDD 146GB 10K SAS 2,5Inch
Western Digital WD Red NAS Hard Drive WD30EFRX 3TB 3.5''
1 350,-
Legg varen i handlekurven
Western Digital WD Red NAS Hard Drive WD30EFRX 3TB 3.5"
HP Common Slot High Efficiency - Strømforsyning - ''hot-plug'' ( plug-in modul ) - 80 PLUS Gold - AC 100-240 V - 460 watt
1 099,-
Legg varen i handlekurven
HP Common Slot High Efficiency - Strømforsyning - "hot-plug" ( plug-in modul ) - 80 PLUS Gold - AC 100-240 V - 460 watt

 

 

Bli kvitt miljøfarlig avfall! Levér inn dine kasserte elektriske og elektroniske produkter her! Det er enkelt, gratis og miljøvennlig. Du finner mer informasjon om ordningen på www.elretur.no.