Brodit Aktiv Bilholder HTC One V T320e
Aktiv holder med cigg-kontakt (512396)
With tilt swivel.
The active holder charges your HTC when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
Please, carefully read all instructions and review the pictures before attaching the holder.
- 1. Unscrew the screw in the center of the holder. Remove the holder from the tilt swivel base plate. Place the base plate onto the desired position. Screw the base plate into place by using the enclosed screws.
- 2. Start to thread the center screw into the base plate. When you connect with the nut, pull the holder towards you to prevent the nut from spinning around. Tighten the screw firmly. Then loosen the screw sligthly for easier angling/rotation of the holder.
- 3. Slide the device into the holder. To remove the device from the holder, slide it out. Use the tilt swivel to adjust the angle.
- 4. The holder is in place.
Brodit 512396. Power source type: Cigar lighter, DC voltage range: 12/24 V